• Content Count

  • Joined

  • Last visited

Community Reputation

1 Neutral

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

  1. Hey TFDI, I have a big big request for Smartcars: I'm often flying vfr, and sometimes without checklist. And unfortunately I often forget to activate smartcars. The program itself is always started, but I forget to activate the flight. So i have to return to the departure airport and to do the flght again 🤪 🤯 It would be very kind, if Smartcars could check, if I set Thrust-Levers to more than 50% and when this happens and smartcars isnt connected, then generate a alarm sound and send a message to the green message bar in the Simulator. That would be very great, if you could implement that!
  2. Hey Tfdi, I have a small feature-request: Would it be possible, to implement stopover landings? The actual state is, that the log with a stopover looks as follows: smartCARS version, 2018.8.26 UTC [17:24:03] Preflight started, flying offline [17:24:03] Flying A2A Piper PA-24-250 Comanche N822JH [17:27:01] Engine 1 is on [17:30:07] Pushing back with 81 kg of fuel [17:30:48] Taxiing to runway [17:35:17] Taking off [17:35:26] Climbing, pitch: 6, roll: 1 degrees right, 81 kts [17:35:26] Cruising at 2000ft, pitch: 6, 81 kts [17:35:35] Gear lever raised at 60 ft at 92 kts [18:20:06] Descending early, distance: 73 nm [18:20:06] Approaching early [18:20:07] Early final approach, 134 kts [18:22:06] Gear lever lowered at 475 ft at 89 kts [18:25:06] Touched down at -102 fpm, gear lever: down, pitch: 1, roll: 2 degrees left, 81 kts [18:25:06] On the ground 66 nm from the planned arrival airfield [18:25:24] Landed in 1978 ft, fuel: 50 kg, weight: 984 kg [18:25:24] Taxiing to gate [18:26:20] The flight may now be ended [18:26:20] Arrived, flight duration: 00:56 [18:27:55] Engine 1 is off [18:28:32] Engine 1 is on [18:58:26] Gear lever raised at 4320 ft at 120 kts [19:06:03] Gear lever lowered at 1015 ft at 104 kts [19:12:15] Engine 1 is off As you can see, the takeoff and the landing after the stopover is not more reported in the log. I think, it should be easy, to enable the logging after the stopover.
  3. For some challenges it would be interesting to see in the smartcars-log, if the pilot has used the live-weather or not. Is there any way to show, if the pilot are using active sky or rexx weather and evaluate, if this weather engines are running on live-weather mode?