BuBickmann2@gmx.de

stopover Landing

Recommended Posts

Hey Tfdi,

I have a small feature-request:

Would it be possible, to implement stopover landings?

The actual state is, that the log with a stopover looks as follows:

smartCARS version 2.1.31.0, 2018.8.26 UTC
[17:24:03] Preflight started, flying offline
[17:24:03] Flying A2A Piper PA-24-250 Comanche N822JH
[17:27:01] Engine 1 is on
[17:30:07] Pushing back with 81 kg of fuel
[17:30:48] Taxiing to runway
[17:35:17] Taking off
[17:35:26] Climbing, pitch: 6, roll: 1 degrees right, 81 kts
[17:35:26] Cruising at 2000ft, pitch: 6, 81 kts
[17:35:35] Gear lever raised at 60 ft at 92 kts
[18:20:06] Descending early, distance: 73 nm
[18:20:06] Approaching early
[18:20:07] Early final approach, 134 kts
[18:22:06] Gear lever lowered at 475 ft at 89 kts
[18:25:06] Touched down at -102 fpm, gear lever: down, pitch: 1, roll: 2 degrees left, 81 kts
[18:25:06] On the ground 66 nm from the planned arrival airfield
[18:25:24] Landed in 1978 ft, fuel: 50 kg, weight: 984 kg
[18:25:24] Taxiing to gate
[18:26:20] The flight may now be ended
[18:26:20] Arrived, flight duration: 00:56
[18:27:55] Engine 1 is off
[18:28:32] Engine 1 is on
[18:58:26] Gear lever raised at 4320 ft at 120 kts
[19:06:03] Gear lever lowered at 1015 ft at 104 kts
[19:12:15] Engine 1 is off

As you can see, the takeoff and the landing after the stopover is not more reported in the log.

I think, it should be easy, to enable the logging after the stopover.

 

 

Edited by BuBickmann2@gmx.de
  • Like 1

Share this post


Link to post
Share on other sites

I know this an old post. The reason I am looking on the forums is for any support on stop-overs. This would be a plus. Any news on this feature?

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.