Leszek Kwasniowski Posted June 1, 2019 Share Posted June 1, 2019 Hello all, It's a small bug but still important to report. Flight SWA4045 from TJSJ and KBWI - https://pacx.online/flight/B654694D3 Delay was set to 45 minutes from the beginning (just like in the real world flight). I advised passengers about the medium delay (30 mins) on the ground and then about the very short delay (10 mins) when I was starting my descend. As you can see in the event log in the link I've attached, it has medium delay twice and apparently still passengers complained they've not been told about the delay. More importantly, after I landed, a flight attendant apologized passenger for diversion (instead of delay) and started to talk about accomodating them. According to the PACX log, these are the sound files that had been played then: [SOUND][6/1/2019 6:28:19 PM]: Added "{Sounds\Standard\9 - After Landing\Part 1\Variation 2.swv, Sounds\Standard\9 - After Landing\Part 2\Variation 1.swv, Sounds\Standard\9 - After Landing\Delay\Delay 1.swv, Sounds\Standard\9 - After Landing\Coordinate\Variation 2.swv}" to Primary queue It just seems like a messed up file or just wrong file being loaded. I hope it will be helpful! Leszek Kwasniowski Link to comment Share on other sites More sharing options...
turbofandude Posted June 2, 2019 Share Posted June 2, 2019 First off, thank you very much for the extremely helpful report! The sound file was indeed incorrect. We've corrected it and it will not be an issue in the next update. Regarding the delay, were ANY of the delays unannounced? Link to comment Share on other sites More sharing options...
Leszek Kwasniowski Posted June 2, 2019 Author Share Posted June 2, 2019 @turbofandude Let's create a little timeline. I loaded up a flight with around 45 minute delay. Immediately I announced the delay, choosing 30 minute option. The time on the clock was reduced (as it should be) and was showing 15 minute delay now. As I made up some time during the flight, I realized on the descend that I will still have about 10-15 minute delay - I did second announcement, this time choosing 10 minute option - the time was reduced again. After landing it showed about 4-5 minute delay. Also, I just did another flight and observed another thing, let me post it here, instead of creating new topic. When you make a "Seatbelt sign ON" announcement and you never do the "Seatbelt sign OFF" announcement and then you start a new flight immediately after finishing the previous one, the seatbelt status carries over to the next flight - what I mean by that is that you only have option to announce "Seatbelt sign OFF". As always, I hope it is helpful too. Link to comment Share on other sites More sharing options...
turbofandude Posted June 2, 2019 Share Posted June 2, 2019 Leszek, Regarding delays, it sounds like the delay may have been unannounced (for a brief bit of time), which may have caused that issue. We'll add it to the list to improve. The seatbelt sign option matches the setting the simulator believes it is when you start the flight. If it was "on" from the previous flight, in the sim, it'll still be on. Link to comment Share on other sites More sharing options...
Otto Pilot Posted September 10, 2020 Share Posted September 10, 2020 This topic has been automatically locked due to no responses being given in the past 60 days. If you need any further help, please create a new, detailed forum post or speak to a Community Moderator or Staff Member. Title: Diversion PA after delay, dealing with delays Locked At: 09/10/2020 Locked By: Otto Pilot - TFDi Design Forum Management Link to comment Share on other sites More sharing options...
Recommended Posts