JoshuavdG

PACX is still "Taxiing in" at the Gate

Recommended Posts

 

Good day,

I did two flights today after the last PACX update has been installed. One in the pmdg 737 and one with the majestic Dash 8 and I had the same issue during both flights: when I landed I taxied to the Gate, stopped the Engine, opened the doors, switched of the Seatbelt sign and the Beacon light but PACX was still in the "taxiing in mode" (GSX deboarded the aircraft in the mean time). It happened the first time today after the update. The rest of the flight went well exept for many "extrem flying events"

 

 

The first flight in the 737:

[GENERAL][17.06.2019 10:08:16]: Starting up, version 0.9.4.0
[GENERAL][17.06.2019 10:08:23]: Log ending
[GENERAL][17.06.2019 10:11:03]: Starting up, version 0.9.5.0
[SOUND][17.06.2019 10:35:27]: Added "{Sounds\Crew\Boarding Status\Variant 4.swv}" to Primary queue
[EVENT][17.06.2019 10:43:00]: Added event of type PACX.PublicAddress
[SOUND][17.06.2019 10:43:14]: Added "{Sounds\Standard\1 - Dep Welcome\1st Paragraph\Variant 1.swv, Sounds\Standard\1 - Dep Welcome\2nd Paragraph\Variant 1.swv, Sounds\Standard\1 - Dep Welcome\3rd Paragraph\Variant 2.swv}" to Primary queue
[SOUND][17.06.2019 10:44:23]: Added "{Sounds\Crew\Generic\Response\Variant 3.swv}" to Primary queue
[EVENT][17.06.2019 10:54:17]: Added event of type PACX.PublicAddress
[SOUND][17.06.2019 10:54:27]: Added "{Sounds\Standard\2 - Doors Closed\Part 1\Morning\Variance 1.swv, Sounds\Standard\2 - Doors Closed\Part 3\Variation 1.swv, Sounds\Standard\2 - Doors Closed\Cross Check\Variation 2.swv}" to Primary queue
[EVENT][17.06.2019 10:55:49]: Added event of type PACX.PublicAddress
[SOUND][17.06.2019 10:55:55]: Added "{Sounds\Standard\3 - Pushback\1 Seatbelt\Variance 1.swv, Sounds\Standard\3 - Pushback\2 Exits\Variance 2.swv, Sounds\Standard\3 - Pushback\3 Decompression\Variance 2.swv, Sounds\Standard\3 - Pushback\4 Water Landing\Variance 2.swv, Sounds\Standard\3 - Pushback\5 No Smoking\Variance 2.swv, Sounds\Standard\3 - Pushback\6 Ending\Variance 2.swv}" to Primary queue
[SOUND][17.06.2019 10:57:09]: Added "{Sounds\Crew\Cabin Status Complete\Variant 1.swv}" to Primary queue
[EVENT][17.06.2019 11:13:10]: Added event of type PACX.PublicAddress
[SOUND][17.06.2019 11:13:21]: Added "{Sounds\Standard\4 - 10K\Variance 2.swv}" to Primary queue
[EVENT][17.06.2019 11:18:55]: Added event of type PACX.PublicAddress
[SOUND][17.06.2019 11:19:01]: Added "{Sounds\Standard\A - Seatbelt\Off\Variant 1.swv}" to Primary queue
[EVENT][17.06.2019 11:29:18]: Added event of type PACX.InFlightService
[EVENT][17.06.2019 11:30:07]: Added event of type PACX.PublicAddress
[SOUND][17.06.2019 11:30:14]: Added "{Sounds\Standard\A - Seatbelt\On\Variant 4.swv}" to Primary queue
[EVENT][17.06.2019 11:31:18]: Added event of type PACX.PublicAddress
[SOUND][17.06.2019 11:31:28]: Added "{Sounds\Standard\5 - Drinks and Snacks\Variance 3.swv}" to Primary queue
[VOCALCONTROL][17.06.2019 11:51:35]: No recognition result
[EVENT][17.06.2019 11:51:39]: Added event of type PACX.PublicAddress
[VOCALCONTROL][17.06.2019 11:51:42]: No recognition result
[EVENT][17.06.2019 11:51:45]: Added event of type PACX.PublicAddress
[EVENT][17.06.2019 13:09:03]: Added event of type PACX.InFlightService
[EVENT][17.06.2019 13:10:03]: Added event of type PACX.PublicAddress
[SOUND][17.06.2019 13:10:08]: Added "{Sounds\Standard\5 - Meals\Variance 1.swv}" to Primary queue
[EVENT][17.06.2019 13:36:02]: Added event of type PACX.PublicAddress
[SOUND][17.06.2019 13:36:07]: Added "{Sounds\Standard\A - Seatbelt\Off\Variant 1.swv}" to Primary queue
[EVENT][17.06.2019 13:36:08]: Added event of type PACX.PublicAddress
[EVENT][17.06.2019 14:46:22]: Added event of type PACX.ExtremeFlying                            

[SOUND][17.06.2019 14:46:37]: Added "{Sounds\Standard\7 - Customs\Customs Notice 1.swv}" to Primary queue

[EVENT][17.06.2019 14:46:49]: Added event of type PACX.PublicAddress
[EVENT][17.06.2019 14:50:33]: Added event of type PACX.PublicAddress
[SOUND][17.06.2019 14:50:46]: Added "{Sounds\Standard\A - Seatbelt\On\Variant 2.swv}" to Primary queue
[EVENT][17.06.2019 15:04:58]: Added event of type PACX.PublicAddress
[SOUND][17.06.2019 15:05:11]: Added "{Sounds\Standard\8 - Descent\1st Part\Variation 2.swv, Sounds\Standard\8 - Descent\2nd Part\Variation 1.swv}" to Primary queue
[EVENT][17.06.2019 15:21:04]: Added event of type PACX.AheadOfSchedule
[EVENT][17.06.2019 15:21:04]: Added event of type PACX.NoticeableLanding
[EVENT][17.06.2019 15:21:26]: Added event of type PACX.ExtremeFlying
[EVENT][17.06.2019 15:21:26]: Added event of type PACX.PublicAddress
[SOUND][17.06.2019 15:21:31]: Added "{Sounds\Standard\9 - After Landing\Part 1\Variation 2.swv, Sounds\Standard\9 - After Landing\Part 2\Variation 2.swv}" to Primary queue
[EVENT][17.06.2019 15:37:23]: Added event of type PACX.PublicAddress
[SOUND][17.06.2019 15:38:15]: Added "{Sounds\Crew\Generic\Response\Variant 2.swv}" to Primary queue
[GENERAL][17.06.2019 15:43:52]: Log ending

 

Second in the Dash:

[GENERAL][17.06.2019 17:34:02]: Log ending
[GENERAL][17.06.2019 17:36:03]: Starting up, version 0.9.5.0
[GENERAL][17.06.2019 17:40:22]: Starting up, version 0.9.5.0
[EVENT][17.06.2019 18:00:21]: Added event of type PACX.PublicAddress
[SOUND][17.06.2019 18:00:26]: Added "{Sounds\Standard\1 - Dep Welcome\1st Paragraph\Variant 1.swv, Sounds\Standard\1 - Dep Welcome\2nd Paragraph\Variant 2.swv, Sounds\Standard\1 - Dep Welcome\3rd Paragraph\Variant 1.swv}" to Primary queue
[EVENT][17.06.2019 18:02:43]: Added event of type PACX.PublicAddress
[SOUND][17.06.2019 18:02:48]: Added "{Sounds\Standard\2 - Doors Closed\Part 1\Evening\Variance 1.swv, Sounds\Standard\2 - Doors Closed\Part 3\Variation 1.swv, Sounds\Standard\2 - Doors Closed\Cross Check\Variation 1.swv}" to Primary queue
[EVENT][17.06.2019 18:04:29]: Added event of type PACX.PublicAddress
[SOUND][17.06.2019 18:04:35]: Added "{Sounds\Standard\3 - Pushback\1 Seatbelt\Variance 1.swv, Sounds\Standard\3 - Pushback\2 Exits\Variance 2.swv, Sounds\Standard\3 - Pushback\3 Decompression\Variance 2.swv, Sounds\Standard\3 - Pushback\4 Water Landing\Variance 1.swv, Sounds\Standard\3 - Pushback\5 No Smoking\Variance 2.swv, Sounds\Standard\3 - Pushback\6 Ending\Variance 2.swv}" to Primary queue
[SOUND][17.06.2019 18:05:33]: Added "{Sounds\Crew\Cabin Status Complete\Variant 3.swv}" to Primary queue

(Here comes over half an hour of "Added event of type PACX.ExtremeFlying"

EVENT][17.06.2019 18:49:48]: Added event of type PACX.PublicAddress
[SOUND][17.06.2019 18:50:03]: Added "{Sounds\Standard\9 - After Landing\Part 1\Variation 1.swv, Sounds\Standard\9 - After Landing\Part 2\Variation 2.swv}" to Primary queue
[SOUND][17.06.2019 18:55:17]: Added "{Sounds\Crew\Generic\Response\Variant 7.swv}" to Primary queue
[EVENT][17.06.2019 18:55:22]: Added event of type PACX.PublicAddress

 

Hope there is an easy way to fix this!

Share this post


Link to post
Share on other sites

@jessferguson79 Please ensure the seatbelt sign is off, as that is required for deboarding to start. If the aircraft you're flying doesn't properly report this information (which many do not), you can use the "Partial" automatic seatbelt sign control option to ensure the seatbelt sign is in the appropriate state during critical phases of flight.

Share this post


Link to post
Share on other sites

This same thing just happened to me.  I am flying the Aerosoft CRJ700 and when I got to the gate I set the parking brake, cut engines, turned off seatbelt sign/all lights and opened the doors.  GSX started deboarding and I even shut off the battery to go Cold and Dark and PACx still said I was Taxiing.  New issue since I last updated the other day.

Share this post


Link to post
Share on other sites

The seat belt control is set to "partial".  Maybe it should be set to  "none"?  I did not have this issue before the last couple updates.

Share this post


Link to post
Share on other sites

I have 09.06 and the updater says I have the latest version.  Is there a newer one?  Maybe something unique with the Aerosoft CRJ?

Share this post


Link to post
Share on other sites

OK, I just flew the CRJ again.  When I got to the gate and turned the seat belt sign off, set the parking brake and shutdown the engines, PACX said I was still Taxiing.  Then, I went into the interaction menu and chose "Seatbelt sign off" and then deboarding started.  Even though I did not hear the flight attendant announce that the sign was off as I do when in the air.  I had the seatbelt sign control set to "partial".

Share this post


Link to post
Share on other sites

I have the same issue. I set the seatbelt sign to off in zibo 738(x-plane 11), and also announced "Seatbelt Sign Off" in PACX(although I did not hear it announced), but it is still in "Taxiing In". The long flight has done but cannot be recorded... sigh

Share this post


Link to post
Share on other sites

So, I reviewed this and it is working correctly on our side. The seatbelt sign must be off and the engines shut down. If you're using an aircraft that does not use the seatbelt sign variable, you may need to move the switch itself and use the PACX system (unless you have full seatbelt sign control on). @blove can you confirm your exact steps?

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.